It is not wrong to say that windows are the eyes of the house, and they give an aesthetic and attractive appearance to the house.
It is important to choose the right size of the window because it is not easy to replace it because it requires a huge investment.
Also, one has to choose the windows according to the interior and exterior design of the house, the weather, the outside conditions, etc.
It is advised to hire a professional company to measure the window accurately and prevent future damage to the home.
Installing windows is an expensive process, and it is important to get this process done right in the first place.
There are many problems that one will face when window measurements are not taken accurately.
This article provides an overview of the importance of correct window measurements in window installation.
The importance of accurate window measurement
In window installation, there are many benefits to accurate measurement of window In window installation, one avoids many problems.
Where correct window measurement ensures a proper fit, it is important because if your window size is too small, it will not fit in the space.
And if the size of the windows is too big, it will lead to problems like air leakage and dust inside the house.
Accurate window measurement enhances the appearance of a home by installing windows in the correct locations.
It enables one to save money in the long run because if the window is installed improperly, it will increase the chances of being replaced sooner, which entails a heavy cost.
Steps Measure window accurately
Correct window measurements are not an easy task, but it does require the help of a professional window company with experience and knowledge in this field.
There are three steps that are followed while making an accurate window measurement:
Measure the window three times horizontally at the top, center and bottom of the window frame.
Next, measure the window three times vertically from top to bottom on the left, middle, and right side of the window.
It is important to consider the depth of the window because it requires knowing the space required to fit the window after replacement.
Measure the depth of your window with a tape measure from several locations,
and it is recommended to take measurements from the inside and outside of the window to ensure an accurate window measurement.
Commonly used types of trade windows
There are many distinct types of windows, each resulting from a unique combination
of factors such as the type of glass used, the aesthetic design of the window, and more.
Aluminum windows
Aluminum windows have frames that are made of aluminum, the name comes from the material itself,
and these windows are the most common type of window that can be found in both residential and commercial properties.
They are very durable, long lasting, and require very little maintenance on the part of the owner.
These windows and doors are exceptionally attractive and highly effective for commercial and office buildings.
window glass
Tempered glass is the type of commercial glass most commonly used and often required by law,
as it is four to six times stronger than residential glass,
And when it does break, it’s supposed to shatter into small, harmless shards,
unlike residential glass, which shatters into huge sharp shards.
Laminated glass contains a thick layer of plastic sandwiched between two layers of regular glass.
This makes the window more durable and causes the broken glass to stick to the plastic
center rather than shattering outward in the event of a natural or man-made disaster because it strengthens the window.
glass windows
The window company installs the glass in frames attached to the opening in the building’s exterior
walls for the windows of the house, a process referred to as “glazing”.
Three types of glass can be used for windows: single glazing,
double glazing, and triple glazing.
The level of insulation provided by the windows is greatly improved with an increase in the number of layers of glazing.
Increased glazing results in windows that are more energy efficient and are also better at heat and sound insulation.
Triple-glazed windows have three separate panes of glass separated from each other by partitions.
These joints are separated from each other by an inert gas such as argon or krypton,
which acts as an insulating barrier between the panes of glass.
Double-glazed windows also contain two panes of glass that are bonded together.
For more architectural news
Different types of tiles and how to use them in interior design
