Home » News » The Float Lamp fits on top of glass bottles

The Float Lamp fits on top of glass bottles

The Float Lamp fits on top of glass bottles يلائم المصباح العائم أعلى الزجاجات

The Float Lamp fits on top of glass bottles

Designed for different uses including table, floor, suspension and wall options, the Float lamp concept was inspired by traditional Italian table decorations in which candles are placed inside the rims of empty bottles to create a romantic ambiance.

“The idea of ​​Float comes from a romantic inspiration, linked to the image of a candlelit on an old empty bottle placed on a restaurant table,” says Alessiani.

“A symbol of simplicity, strong and poetic, which brings us back to the world of restaurants and wineries.”

As such, the lamp’s aluminum body can be freely placed on any bottle (from small to magnum). Thanks to a central hole closed in the upper section.

It makes for an extremely versatile lighting solution ideal for domestic environments. Like the living room, or in commercial spaces like bars and restaurants.

The degree of protection against dust and water is an IP55, which makes the lamp ideal also for outdoor environments.

Float is equipped with a soft touch system for switching on and adjusting the luminous flux. And has a battery that can be used for about 9 hours. Rechargeable via a USB cable and replaceable at the end of the cycle.

For the table and floor versions, steel pedestals are also provided whilst for the ceiling and wall versions. There are special cables provided to make the necessary connections.

Playful versatility

The lamp is available in five colours (white, black, blue, cement, and mauve powder) as well as special finishes on request, which speaks to its versatility.

The design which is multifunctional is gaining momentum as of late. Especially in the lighting sector where interior designers are particularly careful in their choices.

After all, lighting can make or break a space, and with options like Float Lamp opening up an entire arsenal of lighting options for the user to enjoy, the task could be a little less intimidating.

Finally, read more on Archup:

Want to Stay Relevant in Architecture? Become an Adaptive Reuse or Renovation Expert

Call for Submissions: IIDA Healthcare Design Awards

Further Reading From ArchUp

  • Request for Information (RFI)

    A Request for Information (RFI) is a formal process of gathering information from potential suppliers of a good or service.Information…

  • DIY Project to Build Concrete Steps

    DIY Project to Build Concrete Steps Concrete steps are one way to add curb appeal for an attractive porch. While many…

  • Antrax unveils museum of designer radiators

    The inauguration of its new showroom-cum-exhibition space takes place alongside product launches designed by Piero Lissoni and Marc Sadler.If you haven’t heard of designer radiators then you probably haven’t heard of Antrax, the Italian company that has pioneered the product category for some 25 years now. Based just outside of Venice, the company combines energy-saving

  • The use of 3D printing in architecture

    The use of 3D printing in architecture,3D printing has undergone a seismic transformation over the past few years,as 3D printed…

Leave a Reply

Your email address will not be published. Required fields are marked *